JJF Flotation, Wemco Flotation

JJF Flotation, Wemco Flotation
Product Introduction
A self-air suction mechanical stirring floatation cell without slurry suction (Referring to the design of USA wemco flotation machine)
Effective Volume
4~20m3
Product improvement
Shallow groove, the stator lower than the impeller, large slurry circulation volume, low energy consumption; the stator is a cylinder with an elliptical hole which is conducive to the dispersion and mixing of pulp and air. Umbrella shaped dispersion cover with hole keeps the pulp surface stable.

Features

  • Large pulp circulation volume up to 2.5 times, is conducive to mineralization of pulp, reagents and air
    Large air suction volume, good dispersion effect
    Reasonable circulation of mineral slurry and the solid particles suspend well, no sediment in tank, and no need to feed mine when it stopped.
    Wide range of particle size and high recovery rate of ore selection
    Mechanical agitation; self-air suction but not slurry; ladder is necessary during processing (drop height: 300-400 mm)
    It can be combined with model SF as a flotation cells set: model SF as the suction cell and model JJF as the direct flow cell.

Work Principle

When the flotation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.

Technical Data